MDM Portable Garages


Return Home	HOLIDAY SPECIALS	Gift Certificates	On-line Catalog	Our Services	Contact Us	DEALERS	Search Web Site	CONTEST PAGE	THIS MONTHS SALE SPECIALS.

INSTANT GARAGES

storageshed 12'W x 12'L x 8'H $358.00

MDM Products, LLC provides the best in instant and portable protection for any purpose.
Typical uses include:

Equipment / material storage
Workshop areas.
Our pre-drilled frames are easily assembled with minimal hand tools. (Unlike other products where drilling or field cutting is required). Main cover and doors are made from long life UV Resistant and Fire Retardant Poly with Fabric Backing. All fabric components feature heat welded seam construction. Unit features double zipper doors on both ends to allow drive though capability, and good ventilation. Each door contains a pocket for a rigid pole and grommets for securing them up during use. Each unit comes equipped with permanent anchor system.

Exclusive Storage Shed Features
Heavy Duty Galvanized Finish on All Steel Frame
Components for Maximum Strength & Long Life
Easy Bolt Together Design - all Pre-drilled & Cut
Wind Brace Support on Both Sides
Two(2) Double Zipper Doors with Bottom Pockets
Protective Plastic Tube End Caps - All Open Ends
Standard Thread Plated Hardware Kit with Retaining
Nuts & Protective SS Washers
Quick Assembly Wrench included
Heavy Duty Poly Rope for Main Cover Tie Down
Heavy Duty Grommets on Cover & Doors
Two Box Shipment
Four (4) permanent anchors included

dakota 12'W x 20'L x 8'H $499.00

MDM Products, LLC provides the best in instant and portable protection for any purpose.
Typical uses include:

Vehicle protection and storage
Equipment / material storage
Workshop areas.
Our pre-drilled frames are easily assembled with minimal hand tools. (Unlike other products where drilling or field cutting is required). Main cover and doors are made from long life UV Resistant and Fire Retardant Poly with Fabric Backing. All fabric components feature heat welded seam construction. Unit features double zipper doors on both ends to allow drive though capability, and good ventilation. Each door contains a pocket for a rigid pole and grommets for securing them up during use. Each unit comes equipped with earth anchors with a 36” stainless steel tether and a drive rod to secure the unit at 6 strategic points.

Exclusive House Style Features
Heavy Duty Galvanized Finish on All Steel Frame
Components for Maximum Strength & Long Life
Easy Bolt Together Design - all Pre-drilled & Cut
Wind Brace Support on Both Sides
Two(2) Double Zipper Doors with Bottom Pockets
Four(4) Bungee Cord Tie Backs for Doors
Protective Plastic Tube End Caps - All Open Ends
Standard Thread Plated Hardware Kit with Retaining
Nuts & Protective SS Washers
Quick Assembly Wrench included
Heavy Duty Poly Rope for Main Cover Tie Down
Heavy Duty Grommets on Cover & Doors
Two Box Shipment - easily unloaded and transported (shown right)
Average Install time - 2 hours

extendedstorage 12'W x 24'L x 8'H $599.00

MDM Products, LLC provides the best in instant and portable protection for any purpose.
Typical uses include:

Vehicle protection and storage
Equipment / material storage
Workshop areas.
The house style provides extra space along the sides of the enclosure, with maximum height near the center ridge. The pre-drilled frame is easily assembled with minimal handtools. All frame components are made from heavy duty galvanized steel. Main cover and doors are made from long life UV Resistant, Fire Retardant Polyethylene with woven backing
All fabric components feature heat-welded seam construction. Unit features double zipper door on BOTH ENDS to allow drive-through capability, and good ventilation. Each door contains a pocket for a rigid pole at the base. The long lasting cover is designed with full flap provides for run-off of rain or melting snow and diverts water from entering through the perimeter of the cover. Each unit comes completely equipped with a set of earth anchors with 36" stainless steel tethers and a 36” drive rod to secure the unit at each corner and each frame arch.

Exclusive Extended Storage Features
Heavy Duty Galvanized Finish on All Steel Frame
Components for Maximum Strength & Long Life
Easy Bolt Together Design - all Pre-drilled & Cut
Wind Brace Support on Both Sides
Two(2) Double Zipper Doors with Bottom Pockets
Protective Plastic Tube End Caps - All Open Ends
Standard Thread Plated Hardware Kit with Retaining
Nuts & Protective SS Washers
Quick Assembly Wrench included
Heavy Duty Poly Rope for Main Cover Tie Down
Heavy Duty Grommets on Cover & Doors
Assembles in 2 hrs.
Two Box Shipment - easily unloaded and transported (shown right)

quonset 12'W x 20'L x 8'H $499.00

MDM Products, LLC provides the best in instant and portable protection for any purpose.
Typical uses include:

Vehicle protection and storage
Equipment / material storage
Workshop areas.
Our pre-drilled frames are easily assembled with minimal hand tools. (Unlike other products where drilling or field cutting is required). Main cover and doors are made from long life UV Resistant and Fire Retardant Poly with Fabric Backing. All fabric components feature heat welded seam construction. Unit features double zipper doors on both ends to allow drive though capability, and good ventilation. Each door contains a pocket for a rigid pole and grommets for securing them up during use. Each unit comes equipped with earth anchors with a 36” stainless steel tether and a drive rod to secure the unit at 6 strategic points.

Exclusive Round Style Features
Heavy Duty Galvanized Finish on All Steel Frame
Components for Maximum Strength & Long Life
Easy Bolt Together Design - all Pre-drilled & Cut
Wind Brace Support on Both Sides
Two(2) Double Zipper Doors with Bottom Pockets
Four(4) Bungee Cord Tie Backs for Doors
Protective Plastic Tube End Caps - All Open Ends
Standard Thread Plated Hardware Kit with Retaining
Nuts & Protective SS Washers
Quick Assembly Wrench included
Heavy Duty Poly Rope for Main Cover Tie Down
Heavy Duty Grommets on Cover & Doors
Two Box Shipment - easily unloaded and transported (shown right)
Average Install time - 2 hours

extendedstorageround 12'W x 24'L x 8'H $599.00

MDM Products, LLC provides the best in instant and portable protection for any purpose.
Typical uses include:

Vehicle protection and storage
Equipment / material storage
Workshop areas.
MDM Products 12 x 24 x 8 Extended Garages provide the best in portable protection for any purpose. Typical uses include vehicle storage, maintenance space, and material storage. The extra space is ideal for tools, workbench, or additional items such as lawnmowers or cycles. The Round style sheds rain and snow throughout the year. The pre-drilled frame is easily assembled with minimal handtools. All frame components are made from heavy duty GALVANIZED steel. Main cover and doors are made from long life UV Resistant, Fire Retardant Polyethylene with fabric woven backing. The inner layer of black scrim minimizes UV degradation and provides a solid color exterior.
All fabric components feature heat-welded seam construction. Unit features double zipper door on BOTH ENDS to allow drive-through capability, and good ventilation. Each door contains a pocket for a rigid pole at the base edge and bungee cords and grommets to hold in the open position. The long lasting cover design with full side flaps provides for rain or melting snow run-off to divert water from getting through the perimeter of the cover. Each unit comes with a complete anchoring a set of earth anchors and 36” drive rod. The extended length makes it perfect for limousines, elongated trailers, and seasonal storage space. Maximum internal space in a great-looking extended instant garage!

Exclusive Extended Storage Features
Heavy Duty All Steel Frame - Galvanized Finish
Two (2) Full Width Double Zipper Doors Standard with Hold Ups
10 oz. CPAI-84 Polyethylene Black Scrim Fabric Cover and Doors
All Pre-Drilled, Easy Bolt Together Assembly
Wind Brace Support on each Side
Complete Anchoring System Included
Excellent Vehicle & Workshop Size with Extra Space

Mariner 14'W x 24'L x 10'H $749.00

MDM Products, LLC provides the best in instant and portable protection for any purpose.
Typical uses include:

Vehicle protection and storage
Equipment / material storage
Workshop areas.
Our pre-drilled frames are easily assembled with minimal hand tools. (Unlike other products where drilling or field cutting is required). Main cover and doors are made from long life UV Resistant and Fire Retardant Poly with Fabric Backing. All fabric components feature heat welded seam construction. Unit features double zipper doors on both ends to allow drive though capability, and good ventilation. Each door contains a pocket for a rigid pole and grommets for securing them up during use. Each unit comes equipped with permanent anchor system and one door roll-up kit.

Exclusive Mariner Features
Heavy Duty Galvanized Finish on All Steel Frame
Components for Maximum Strength & Long Life
Easy Bolt Together Design - all Pre-drilled & Cut
Wind Brace Support on Both Sides
Two(2) Double Zipper Doors with Bottom Pockets
One (1) complete Roll-up Door Kit
Protective Plastic Tube End Caps - All Open Ends
Standard Thread Plated Hardware Kit with Retaining
Nuts & Protective SS Washers
Quick Assembly Wrench included
Heavy Duty Poly Rope for Main Cover Tie Down
Heavy Duty Grommets on Cover & Doors
Two Box Shipment
Eight (8) permanent anchors included
Installs in 3 hrs

2car 22'W x 24'L x 12'H $1499.00

MDM Products, LLC provides the best in instant and portable protection for any purpose.
Typical uses include:

Vehicle protection and storage
Equipment / material storage
Workshop areas.
Our pre-drilled frames are easily assembled with minimal hand tools. (Unlike other products where drilling or field cutting is required). Main cover and doors are made from long life UV Resistant and Fire Retardant Poly with Fabric Backing. All fabric components feature heat welded seam construction. Unit features double zipper doors on both ends to allow drive though capability, and good ventilation. Each door contains a pocket for a rigid pole and grommets for securing them up during use. Each unit comes equipped with fourteen (14) earth anchors with a 36” stainless steel tether and a drive rod to secure the unit at all strategic points, plus one complete roll-up door kit. (enough for one end)

Exclusive 2 Car Garage Features
Heavy Duty Galvanized Finish on All Steel Frame
Components for Maximum Strength & Long Life
Easy Bolt Together Design - all Pre-drilled & Cut
Wind Brace Support on all 4 corners
Two(2) Double Zipper Doors with Bottom Pockets
One (1) complete Roll-up Door Kit
Protective Plastic Tube End Caps - All Open Ends
Standard Thread Plated Hardware Kit with Retaining
Nuts & Protective SS Washers
Quick Assembly Wrench included
Heavy Duty Poly Rope for Main Cover Tie Down
Heavy Duty Grommets on Cover & Doors
Six Box Shipment - easily unloaded and transported (shown right)
Average Install time - 2 hours

View Cart / Check Out